Core recovery is affected by mechanics, formation condition and circulating-fluid behavior at the same time. Fluid chemistry cannot repair every mechanical problem, but the wrong fluid can make recovery significantly worse.
What Should You Evaluate?
- Make-up water and whether it allows the selected bentonite or polymer system to hydrate correctly.
- Flow rate and whether the core is being washed or eroded.
- Filtration and invasion into weak or fractured formation.
- Lubricity and rod friction in clean versus solids-loaded fluid.
- Lost circulation, poor returns and the ability to transport cuttings without overloading the annulus.
Practical Approach
Start with drilling parameters and core-barrel condition, then evaluate the fluid. Use balanced rheology rather than excessive viscosity. Control filtration where weak formations are being washed. In fractured ground, manage losses before simply increasing flow. Bentonas Core is the application starting point; PLUS or Hi-Vis can be evaluated when stronger suspension or variable conditions justify it.
Common Mistakes
- Trying to solve mechanical core breakage with chemicals alone.
- Increasing flow when washout is already damaging the core.
- Allowing solids to accumulate until torque and pressure rise.
- Changing multiple fluid variables at once, making diagnosis impossible.
Selection / Diagnostic Logic
Diagnose the dominant failure mode first: mechanical breakage, washout, clay interaction, filtration/invasion, poor cleaning or losses. Adjust the fluid only after identifying which mechanism is active.
