Skip to content
Advanced Bentonite Technologies
Core Drilling

Poor Core Recovery in Diamond Drilling: 7 Causes & How to Fix Them

Diagnose fractured ground, excessive flow, reactive clay, filtration, solids loading and lost circulation before changing chemistry.

Technical GuideBentonas

Poor core recovery is a symptom, not a diagnosis. The same low recovery percentage can come from completely different mechanisms, so changing fluid chemistry before identifying the cause often wastes time.

What Should You Evaluate?

  • 1. Weak or fractured formation.
  • 2. Excessive circulation rate and core wash.
  • 3. Mechanical parameters or core-barrel condition.
  • 4. Reactive clay, swelling or sticky cuttings.
  • 5. Excessive filtration or invasion.
  • 6. High solids loading and poor hole cleaning.
  • 7. Lost circulation and unstable returns.

Practical Approach

Look at the recovered core and the drilling response together. Fractured fragments suggest a different problem from smeared clay, washed surfaces or missing intervals. Track pressure, torque, returns and fluid condition by depth. Use one change at a time so the response can be attributed to a cause.

Common Mistakes

  • Treating every low-recovery interval with the same additive.
  • Ignoring the recovered core appearance.
  • Assuming more viscosity will fix losses or mechanical breakage.
  • Failing to record when torque, pressure or returns changed.

Selection / Diagnostic Logic

Classify the failure into formation integrity, hydraulics, chemistry, solids management or losses. Then choose the smallest corrective action that addresses that mechanism.

TECHNICAL CONSULTATION

Let us identify the right bentonite grade for your application.

Start a technical discussion